Home/Entry doors/Point Cook

Entry doors, Melbourne

Entry doors quote in Point Cook.

A rough guide for Point Cook is about $2,400 for a solid cedar entry door, jamb, hardware + install inc GST, with most estimates between $1,600 and $6,300. Every job is different. These are estimates: regional prices adjusted a little for local house prices, not quotes from local tradies. Tradies, quote your entry door jobs in Karven from your phone.

Point Cook VIC
Entry doors, Point Cook2026 estimate

Estimated range

$1,600to$6,300
$1,600$2,400$6,300

Estimate

A rough guide$2,400

What it covers

for a solid cedar entry door, jamb, hardware + install inc GST

Point Cook, on the ground

Entry doors in Point Cook: a rough guide.

Estimates for typical Melbourne jobs, including GST, supplied and installed. Your job could land anywhere on this range, or outside it.

  • 01

    Pivot doors are roughly 1.6× a hinged install. The floor box and the load-rated pivot hardware do most of the extra cost.

  • 02

    Security mesh on a Point Cook entry door is usually quoted on top of the door itself, not as a swap. Budget $750 to $1,400 for the mesh frame, hardware and tension.

  • 03

    Custom-built doors (rebated, raked, arched) skip the standard 7200mm jamb length pricing. Expect a separate joinery quote line.

  • 04

    A rough guide for Point Cook is about $2,400 for a solid cedar entry door, jamb, premium hardware and a 2-person install. Every job is different.

For tradies: spreadsheet vs Karven

Still quoting entry doors in a spreadsheet?

Step
Spreadsheet
Karven
Write an entry door quote
Copy last job's sheet and edit it
Your common items pop up as you type
Update your prices
Edit every sheet by hand
Change it once in My items
Send it to the customer
Export, format, attach, email
A link they open on their phone, with a PDF
Know where it stands
Memory and paperwork
See opened, questions and accepted on your Today screen

Point Cook questions

Entry doors prices in Point Cook.

Quick answers on what entry doors might cost in Point Cook. These are estimates, not quotes.

  • How much does an entry door cost in Point Cook?

    A rough guide for Point Cook is about $2,400, with most estimates between $1,600 and $6,300. It covers a solid cedar entry door, jamb, hardware + install inc GST. It's an estimate from regional prices, not local quote data. Every job is different. Larger spans, premium finishes and hard access push you toward the top end; straightforward swaps and standard specs sit near the bottom.

  • What affects the entry doors price in Point Cook?

    Five things move the number most: scope (size, span, thickness), material grade, site access (driveway, levels, parking for a truck), labour rate set by the crew you pick, and any compliance work specific to the Melbourne council.

  • Are these prices including GST?

    Yes. Every figure on this page is GST-inclusive, supplied and installed. A written quote from a GST-registered tradie should show the total including GST.

  • How quickly can I get a written quote for an entry door in Point Cook?

    Most tradies can give you a written quote within a few days of seeing the job.

  • Do Point Cook entry doors need council approval?

    Like-for-like entry door swaps are usually exempt in VIC. Widening the opening, structural lintel changes, or heritage façades trigger a permit. If a permit or compliance check is needed, ask for it to be listed on the quote, so there are no surprise costs after the job starts.

Want the full price breakdown? Read the entry doors cost guide

Free for 21 days, with no card needed. Then from $29/mo inc GST, with unlimited quotes.

See all plans

For tradies

Quote your next entry door job from your phone.

No card, no setup fees. Your customer accepts online and pays the deposit by card.