Free, printable, no sign-up

Free joinery and kitchen quote template

A printable quote for kitchens, robes and vanities, with lines for cabinetry by the metre, benchtops, cut-outs, hardware and strip-out. It does the sums as you type.

Click any blank to type. Put in a qty and a rate and the amount, GST and total work themselves out. Then print it or save it as a PDF. Nothing you type leaves your browser.

Or build it in Karven and send it as a link

ABN Licence no.

Phone Email

Quote

Quote no.

Date

Valid until

Prepared for

Job address

Scope of work

Joinery & cabinetmaking quote lines
DescriptionQtyRate ex GSTAmount
Kitchen cabinetry
Cabinetry supplied + installed
Tall / pantry units
Handles + soft-close hardware
Appliance cutouts + fit-off
Delivery + site protection
Robes & storage
Robe fit-out supplied + installed
Drawer banks
Sliding doors
Benchtops
Benchtop fabricated + installed
Waterfall end
Sink / cooktop cutouts
Remove old benchtop
Strip-out & extras
Strip out old kitchen / joinery + disposal
Plumbing disconnect / reconnect
Electrical disconnect / reconnect
Extra site labour

Subtotal ex GST

Total inc GST

Deposit to book%

Terms

  • This quote is valid for 30 days and is based on the plans or measures listed.
  • Final dimensions are confirmed by site measure before manufacture.
  • Changes after sign-off of the shop drawings will be quoted separately.
  • Plumbing and electrical connections are not included unless listed.
  • A deposit is due on acceptance to start manufacture.

Accepted by

Signature

Date

Rough starting costs for these joinery & cabinetmaking items

Ex GST. What these might cost you, not a price guide for your area. Your own rates, materials and travel come first, then add your profit before you put a rate on the quote. These are starting costs, not customer prices. Your profit goes on top: at 20% profit, a cost of $1,200 for “Cabinetry supplied + installed” is $1,440 to your customer.

  • Cabinetry supplied + installed$650 to $2,000 / lm
  • Tall / pantry units$800 to $2,400 / each
  • Handles + soft-close hardware$350 / allowance
  • Appliance cutouts + fit-off$120 / each
  • Delivery + site protection$150
  • Robe fit-out supplied + installed$1,800 / lm
  • Drawer banks$300 / each
  • Sliding doors$950 / opening
  • Benchtop fabricated + installed$200 to $950 / lm
  • Waterfall end$450 / each
  • Sink / cooktop cutouts$120 / each
  • Remove old benchtop$250
  • Strip out old kitchen / joinery + disposal$800
  • Plumbing disconnect / reconnect$450
  • Electrical disconnect / reconnect$400
  • Extra site labour$110 / hr

Why a link quote beats a PDF template

With a printed quote the benchtop question is a phone call. On the link they pick the benchtop, see the price and accept.

  • They say yes on their phone. Accept with their name, a tick or a signature, with a record of who and when.
  • Extras and choices add themselves up. They tick an optional extra or pick one option and the total, GST and deposit follow.
  • The deposit comes with the yes. By card when they accept, or your bank and PayID details show straight after.
  • You know when it's opened. And Karven has a follow-up written for the quiet ones. Nothing goes until you tap Send.
  • They still get a PDF. Attached to the email, matching the link line for line.

Joinery & cabinetmaking at 14 Banksia Avenue

Prices ex GST

Kitchen cabinetry

Supply and install new kitchen cabinetry. Run: approx. 4lm. Carcasses, doors and panels made to the agreed layout. Cabinetry range: Flat-pack. Soft-close hinges and drawer runners throughout. Cabinets scribed to walls and levelled, kickers and end panels fitted. Appliance cutouts and fit-off. Site left clean, all packaging removed.

Cabinetry supplied + installed, flat-pack

4 lm × $780.00

$3,120.00

Delivery + site protection

$180.00

Includes all work and materials listed above.

Subtotal (ex GST)
$3,300.00
GST (10%)
$330.00
Total inc GST
$3,630.00

A $363.00 deposit (10% of the total) is due when you accept.

Ridgeline Joinery0491 570 156hello@example.comQuote no.RJ-2026-014Date20 Oct 2026Prepared forSam Nguyen14 Banksia Avenue, Penrith NSW 2750sam.nguyen@example.comValid until19 Nov 2026Joinery & cabinetmaking at 14 Banksia AvenuePrices ex GSTKitchen cabinetrySupply and install new kitchen cabinetry.Run: approx. 4lm.Carcasses, doors and panels made to the agreed layout.Cabinetry range: Flat-pack.Soft-close hinges and drawer runners throughout.Cabinets scribed to walls and levelled, kickers and end panels fitted.Appliance cutouts and fit-off.Site left clean, all packaging removed.Cabinetry supplied + installed, flat-pack4 lm × $780.00$3,120.00Delivery + site protection$180.00Subtotal (ex GST)$3,300.00GST (10%)$330.00Total inc GST$3,630.00A $363.00 deposit (10% of the total) is due when you accept.Ridgeline Joinery

The same sample joinery & cabinetmaking quote as a link on the customer's phone and as the PDF that goes with it. One document, so they always say the same thing.

Skip the maths and the printing

In Karven these joinery & cabinetmaking items come up as you type with your cost, your profit % is added on top and GST is added for you. Your customer gets a link: they tick any extras, ask a question, accept and pay the deposit by card. You see when they've opened it.

Start free, no cardKarven for cabinetmakers

Quote template questions

Common questions

  • Is this joinery & cabinetmaking quote template really free?

    Yes. No email, no sign-up. Type on the page, then print it or save it as a PDF from your browser's print screen.

  • Should my quote show prices including GST?

    If you're registered for GST, show the total including GST. Australian consumer law expects consumers to see a single total price, and the ATO's tax invoice rules apply when the job is invoiced. If you're not registered, don't add GST at all.

  • What terms suit a joinery & cabinetmaking quote?

    This template starts with these: This quote is valid for 30 days and is based on the plans or measures listed. Final dimensions are confirmed by site measure before manufacture. Changes after sign-off of the shop drawings will be quoted separately. Change them to suit how you work.

  • How long should a quote be valid for?

    Most tradies use 14 to 30 days, because material prices move. Put the date on the quote so there's no argument later.

  • What's the difference between this template and Karven?

    This template is a printable page you fill in by hand. Karven builds the quote for you from your own items and prices, adds GST, sends it as a link the customer can accept and pay a deposit on, and tells you when it's opened. 21 days free, then $29/mo inc GST.

Related

Free templates for other trades